Tresco L-FLXTPE-12CCT-1 White-Tunable LED Tape, 12V, 16.4-foot

Tresco L-FLXTPE-12CCT-1 changes between warm and cool shades of white, from 2700K to 6500K. This is 12V white-tunable tape, not RGB colored-light tape or a complete kit.

What Is Included

One 16.4-foot (5m) adhesive-backed roll only. The power supply, receiver and starter lead are sold separately.

Required to Make It Work — Sold Separately

• A 12V DC Class 2 supply sized for the connected load. For the full 49W roll, use a 60W supply; the manufacturer’s wiring guide identifies L-DC-SLELT60-1 with its mounting block. Do not use a 24V supply.
• L-RGBCCT1-PREC-1 parent controller/receiver, set to CCT mode.
• One CCT starter lead: L-TPEPKT-2M-CCT-1 (79-inch) or L-TPEPKT-2IN-CCT-1 (2-inch). Use CCT connectors, not ordinary single-color or RGB leads.

Connection Order

Outlet → 12V power supply/mounting block → parent receiver → CCT starter lead → tape. Confirm the driver kit includes its input cord. Keep total load within the driver, receiver and connection ratings.

Specifications

Specifications & Installation

12V DC; 3W per foot; 49W per roll; approximately 10mm wide. Cut only at the 1-inch/25mm marked increments with power disconnected. The manufacturer lists a maximum 16-foot continuous run per starter cord; do not extend a run beyond that limit. Use the instructions to divide longer layouts.

Optional Accessories — Sold Separately

L-WLD-CCT-WH-1 wall controller or L-RGBCCT-RMT-1 handheld remote adds wireless operation. CCT link cords, child receivers and L-4P6O-1 distribution adaptor are optional for additional runs. The manufacturer currently identifies this tape as a closeout item.

Downloads & Resources

• White-tunable tape component and wiring guide
• Tresco CCT FlexTape installation instructions
• Receiver connections and compatible power supply example