Domus Line FLEXYLED AT6 — 151002415012459, 151002415012059, 151002415012259, 15102420012279, 151024600122236

Domus Line FLEXYLED AT6 is a flexible, silicone-covered light strip for cabinet and furniture illumination. Select a model below; the table identifies its length, fixed light color and power requirement. This is a light strip, not a complete lighting kit.

What Is Included

One AT6 strip in the selected length and color, with two factory-fitted 2m (approximately 79-inch) Micro24 leads. The strip has adhesive backing; the manufacturer supplies fastening hooks and screws for surface mounting. Application photos show finished installations, not additional included products.

Pre-wired at both ends: Approximately 79 inches of cable is already attached to each end. No extension cable is required for the standard connection. Buy an optional extension only when your layout needs more reach.

Required to Make It Work — Sold Separately

• Domus Line single-color X-DRIVER 30/24D (0859501N) for one 15W or 20W strip; choose X-DRIVER 96/24D for the full 60W strip.
• Domus Line NEMA U.S. power cord 1159801/S (IEC C7), unless included in your chosen driver kit.
• Keep at least 10% spare driver capacity: 15W needs at least 16.5W; 20W needs 22W; 60W needs 66W. A 60W driver is too small for the full 60W strip under this rule. Add all connected loads.
• For a basic system, switch power at the outlet. For remote, sensor or app operation, add the matching X-DRIVER control module and control device. Those features are not built into the strip.

Connection Order

U.S. outlet → U.S. power cord → 24V X-DRIVER → factory Micro24 lead → AT6 strip. Follow the installation drawing for cut sections and the second lead. Never connect the strip directly to 120V or to a 12V supply.

Specifications

Installation & Optional Accessories

Recess into a 6 × 6mm groove, or surface mount. Cut only at the marked positions, approximately 21.7mm apart; never fold into a sharp right angle. Cutting removes assurance of the original IP44 rating; seal the cut end with transparent silicone as instructed. Indoor use only; installation by qualified personnel. A Micro24 extension is optional when the included lead will not reach. CM3-XD enables Bluetooth; CM4-XD enables Wi-Fi. Modules and extensions are sold separately.

Downloads & Resources

• AT6 installation instructions
• AT6 manufacturer specification sheet
• X-DRIVER specifications and accessories