Kohler Purist Wall-Mount Bathroom Faucet Trim

In Store Only — Contact our Anaheim showroom to purchase.

Will this fit my installation?

For wall-mounted installation above a bathroom basin. Three openings with handles on 8-inch centers and the spout centered between them. Confirm rough-in depth relative to the finished wall, outlet height above the basin, spout projection and handle clearance against the model-specific installation drawing before closing the wall or drilling.

Kohler specifies three 1-1/2-inch cutout holes and 1-1/2 to 6 inches between the bottom of the spout and the top of the fixture rim. Spout angle: 35 degrees.

Models and finishes

• Maximum flow: 1.2 GPM (4.5 L/min) at 60 PSI
• Mounting: Wall mount
• Two cross handles for separate hot and cold control
• Spout reach in current technical table: 6-3/4" (171 mm)
• Drain: Sold separately

Included

• Spout, two cross handles, and coordinating wall escutcheons
• Trim adapters and trim mounting hardware; rough-in valve is not included

Required parts and connections

Kohler K-410-K two-handle wall-mount ceramic valve is required and sold separately. It uses 5/8-inch OD hot and cold supply connections. Install the rough-in valve at the depth specified for this trim. No additional handle kit is required. A compatible basin drain, trap, shutoff provisions and installation materials are separate. Choose a drain with or without overflow to match the basin; overflow fields in the catalog do not mean a drain is included.

Optional accessories

Choose the drain style and matching finish suitable for your basin. Coordinating towel bars, hooks, paper holders and faucet cleaners are optional and sold separately. Extension components are needed only when the actual wall depth requires them; confirm the correct kit with Kohler before ordering.

Specifications and installation

• Manufacturer installation instructions
• Manufacturer specifications and dimensions

Kohler support: 1-800-456-4537.

California Proposition 65

⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.

In Store Only — Contact our Anaheim showroom to purchase.

Will this fit my installation?

For wall-mounted installation above a bathroom basin. Three openings with handles on 8-inch centers and the spout centered between them. Confirm rough-in depth relative to the finished wall, outlet height above the basin, spout projection and handle clearance against the model-specific installation drawing before closing the wall or drilling.

Kohler specifies three 1-1/2-inch cutout holes and 1-1/2 to 6 inches between the bottom of the spout and the top of the fixture rim. Spout angle: 35 degrees.

Models and finishes

• Maximum flow: 1.2 GPM (4.5 L/min) at 60 PSI
• Mounting: Wall mount
• Two lever handles for separate hot and cold control
• Finished-wall-to-spout-outlet projection: 5-1/2 to 6-3/4 inches (140–171 mm), depending on rough-in depth
• Drain: Sold separately

Use the projection range in Kohler’s installation drawing when positioning the basin. The actual outlet location depends on the valve depth behind the finished wall; follow the linked drawing and installation instructions before drilling.

Included

• Spout, two lever handles, and coordinating wall escutcheons
• Trim adapters and trim mounting hardware; rough-in valve is not included

Required parts and connections

Kohler K-410-K two-handle wall-mount ceramic valve is required and sold separately. It uses 5/8-inch OD hot and cold supply connections. Install the rough-in valve at the depth specified for this trim. No additional handle kit is required. A compatible basin drain, trap, shutoff provisions and installation materials are separate. Choose a drain with or without overflow to match the basin; overflow fields in the catalog do not mean a drain is included.

Optional accessories

Choose the drain style and matching finish suitable for your basin. Coordinating towel bars, hooks, paper holders and faucet cleaners are optional and sold separately. Extension components are needed only when the actual wall depth requires them; confirm the correct kit with Kohler before ordering.

Specifications and installation

• Manufacturer installation instructions
• Manufacturer specifications and dimensions

Kohler support: 1-800-456-4537.

California Proposition 65

⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.