Ruvati RVM4505 Parmi 29-1/2-inch Undermount Double Bowl Kitchen Sink

Ruvati RVM4505 Parmi double-bowl kitchen sink in brushed stainless steel. One sink set per purchase.

Will this fit my cabinet?

Minimum base cabinet: 33 inches wide. Measure the cabinet from outside edge to outside edge, not the door or countertop opening. Your installer must also check internal obstructions, mounting-clip space, countertop support, plumbing and faucet clearance.

Overall dimensions versus inside-bowl dimensions

Overall dimensions are not countertop cutout dimensions. Check the actual sink against the supplied template before cutting. Left and right refer to the bowls as viewed while standing in front of the installed sink.

Undermount installation and faucet planning

The sink mounts below the countertop. Have a professional installer confirm the countertop material, cutout, support and mounting-clip clearance. This sink has no faucet deck; plan faucet holes in the countertop or a compatible wall installation. Check faucet reach, backsplash clearance and handle movement before drilling.

Included in the box

• Stainless steel sink
• Two basket-strainer drain assemblies (RVA1025)
• Bottom rinse grids, set of two (RVA64500)
• Mounting clips
• Cutout template

Plumbing and installation supplies

Faucet sold separately. Existing faucets may be reused if compatible with the installation. Supply connections, drain trap and installation supplies are sold separately. Your installer should determine the required connections.

Optional — garbage disposal: sold separately. If fitting a disposal, use the disposal-compatible flange specified for that installation; the included basket strainer is for an installation without a disposal. Check the disposal manufacturer's requirements before ordering parts.

Product details

16-gauge T-304 stainless steel with 18/10 chromium/nickel content, commercial brushed finish, curved inside corners, sound-dampening padding and undercoating. Workstation: No.

Optional accessories — sold separately

Use accessories specified for RVM4505; verify compatibility before ordering. The optional RVA1035 drain cover is sold separately.

Disposal flange — optional, sold separately

RVA1049ST is listed as an optional accessory in the sink specification. It is intended for compatible InSinkErator disposal installations. Confirm your exact disposal model and flange requirements with your installer; a disposal and flange are not included with this sink.

Manufacturer details and photo

Specifications, installation, care and warranty

• Dimension drawing and specification sheet (PDF)
• Installation, care and warranty guide (PDF)

Follow the manufacturer's care instructions. Clean with mild detergent and water, then dry with a soft cloth. Avoid bleach and steel wool. Ruvati's limited lifetime residential sink warranty is subject to its terms and proof-of-purchase requirements; rinse grids, strainers and other accessories are excluded from that sink warranty.

Shipping and returns

Confirm shipping charges and delivery timing for your address before ordering. No delivery date is promised on this page. See ROK shipping information or contact ROK at 1-800-763-8390 for sink-specific details.

ROK's published general policy allows returns within 30 days of delivery, in like-new condition with original packaging, at the customer's return-shipping expense. Obtain authorization before returning; products must be uninstalled and free of scratches or defects. Inspect within 24–48 hours of delivery and contact ROK immediately about shipping damage or manufacturer defects, retaining the item and packaging.

Restocking fees may apply. Manufacturer-direct products are subject to the manufacturer's restocking terms. Contact ROK with your selected SKU before ordering to confirm the applicable fee and any product-specific exceptions. No fixed restocking percentage is confirmed here for these sinks.

ROK return policy · Return conditions