Kohler K-28304-KS-NA Rite-Temp Thermostatic Valve Body and Cartridge Kit with Service Stops

• Features
• Includes valve body, thermostatic cartridge, rough-in guide
• and mud guard
• 1/2" Universal NPT and direct sweat inlets and outlets with
• stops (installed)
• Service stops include integral check valves
• 9 gpm (34 l/min) maximum flow rate at 45 psi
• Single lever design cycles from off through cold to hot
• One-piece cartridge design simplifies installation and
• maintenance
• Adjustable high-temperature limit stop to control maximum
• water temperature
• Requires valve trim to complete installation (sold separately)
• Material
• Forged dezincification-resistant brass body provides long
• term reliability and resistance to aggressive water conditions
• Technology
• Thermostatic technology automatically maintains outlet
• temperature within +/- 3.6°F (+/- 2°C) during water pressure
• fluctuations
• Installation
• Designed for use in standard, back-to-back and thin wall
• installations
• Valve body features integral mounting locations and
• symmetrical valve inlets to simplify installation
• Cartridge is reversible for installations where hot and cold
• supplies are reversed
• Rough-in guide designed for both standard and thin wall
• installations
• Installed valve rough-in can be flushed and pressure-tested
• to 150 psi max (air or water) without cartridge by using
• included test cap
• Optional Products/Accessories
• K-10350 Deep rough-in kit
• K-10351 Test cap for K-8300 Series valve bodies
• Codes/Standards
• ASME A112.18.1/CSA B125.1
• ASSE 1016/ASME A112.1016/CSA B125.16
• IAPMO Certification
• Technical Information
• All product dimensions are nominal.
• Shower Valve:
• Flow Rate (Max) @ 45 psi 9 gal/min (34.1 l/min)
• Manufacturer's minimum rated flow: 1.5 gal/min (5.7 l/min)
• Pressure: 45 psi (3.1 bar)
• Maximum (Static) Pressure: 125 psi (8.6 bar)
• Minimum (Operating) Pressure: 20 psi (1.4 bar)
• Notes
• Install this product according to the installation
• instructions.
• For use with showerheads or handsprays rated
• at 1.5 gal/min (5.7 l/min) or higher.

Required / sold separately

Compatible Rite-Temp valve trim is required and sold separately. Use with showerheads or handsprays rated at 1.5 gpm or higher.

Optional accessories

K-10350 deep rough-in kit; K-10351 replacement test cap.