Rustic Black Barn Door Kit For Wooden Door
This complete set with visible steel hardware ensures easy installation of a standard wooden door.
- +-
Details
The ball bearing wheels of the door supports are made of durable plastic. Ball bearings for easy movement. The system is equipped with an anti-derailment device for each bearing support to prevent the door from stalling when misused.
Kit Includes:
1 two meters rail (flat bar)
2 single roller supports for 1-3/8" or 1-3/4" door
2 end-bumpers
5 wall-mount brackets
2 anti-derailment pieces
1 door bottom guide Screws are included
Product specifications:
Door Type: Wood
Rail Length: 78-3/4" (2m)
Door Thickness: 1-3/8" to 1-3/4" (34.9 mm to 44.5 mm)
Weight Capacity per Door: 33 to 220 lb (15 to 100 kg)
Function: Single Panel
Door Installation: In Front of Wall
Track Mounting: Wall Front Using Brackets
Design Intent: Closet & Walk-In Closet, Standard Access Door
Door Mounting Method: Drill
Roller Position: Upper
Door Width: 24 to 40 in (610 mm to 1020 mm)
Rail Material: Steel
Rail Finish: Black
Number of Doors: 1
Roller Type: Ball Bearing
Groove Needed for Guiding System: No
Track Type: Flat Bar
Groove Width at the Bottom of Door: 3/16" to 9/32" (5 to 7 mm)
Groove Depth 25/32" (20mm)
Material: Steel
Important information:
Door handles and door not included. It is recommended to use a solid or glass door in order to obtain the minimum weight to reduce noise resonance. Use a wider door opening to avoid angled views and preserve privacy. It is recommended to use a door 34" wide for an opening of 30". The bottom of the door requires a groove for the concealed guiding system. Preparation: Remove the frame mouldings or install a piece of wood (not included) of the same thickness and length before setting the new hardware in place to ensure the release of the door. Always make sure that the product is properly attached or installed using appropriate fixings material. An additional anchor may be required for installation (sold separately).
Note:
- Picture for visual reference only: actual product may vary from that shown in photo.
- Be sure to order hardware before beginning fabrication or installation work.
- Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice!
- All technical and drawings documents contain examples for the assembly of different supplier hardware.
- The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
- At any time the execution and installation must be done by qualified persons.
- Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
- Always make sure to fix properly the product using the right fixation for the proper material.
- Never use any spray lubricant on these products.
- Always use a dry cloth to remove debris / dust / residues (sawdust and / or aluminum) from rails before installing hangers.
Product Specifications
Manufacturer Info
Brand | ROK |
---|---|
Manufacturer Part | 2030642FBKIT |
Other Info
Sold | Each |
---|---|
Country of Manufacture |