{"title":"Lighting","description":null,"products":[{"product_id":"domus-line-flexyled-at6-24v-led-strips","title":"Domus Line FLEXYLED AT6 — 151002415012459, 151002415012059, 151002415012259, 15102420012279, 151024600122236","description":"\u003cp\u003eDomus Line FLEXYLED AT6 is a flexible, silicone-covered light strip for cabinet and furniture illumination. Select a model below; the table identifies its length, fixed light color and power requirement. This is a light strip, not a complete lighting kit.\u003c\/p\u003e\u003ch3\u003eWhat Is Included\u003c\/h3\u003e\u003cp\u003eOne AT6 strip in the selected length and color, with two factory-fitted 2m (approximately 79-inch) Micro24 leads. The strip has adhesive backing; the manufacturer supplies fastening hooks and screws for surface mounting. Application photos show finished installations, not additional included products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-wired at both ends:\u003c\/strong\u003e Approximately 79 inches of cable is already attached to each end. No extension cable is required for the standard connection. Buy an optional extension only when your layout needs more reach.\u003c\/p\u003e\u003ch3\u003eRequired to Make It Work — Sold Separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.domusline.com\/x-driver\/\" target=\"_blank\" rel=\"noopener\"\u003eDomus Line single-color X-DRIVER 30\/24D (0859501N)\u003c\/a\u003e for one 15W or 20W strip; choose \u003ca href=\"https:\/\/www.domusline.com\/x-driver\/\" target=\"_blank\" rel=\"noopener\"\u003eX-DRIVER 96\/24D\u003c\/a\u003e for the full 60W strip.\u003c\/li\u003e\n\u003cli\u003eDomus Line NEMA U.S. power cord 1159801\/S (IEC C7), unless included in your chosen driver kit.\u003c\/li\u003e\n\u003cli\u003eKeep at least 10% spare driver capacity: 15W needs at least 16.5W; 20W needs 22W; 60W needs 66W. A 60W driver is too small for the full 60W strip under this rule. Add all connected loads.\u003c\/li\u003e\n\u003cli\u003eFor a basic system, switch power at the outlet. For remote, sensor or app operation, add the matching X-DRIVER control module and control device. Those features are not built into the strip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConnection Order\u003c\/h3\u003e\u003cp\u003eU.S. outlet → U.S. power cord → 24V X-DRIVER → factory Micro24 lead → AT6 strip. Follow the installation drawing for cut sections and the second lead. Never connect the strip directly to 120V or to a 12V supply.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eROK SKU\u003c\/th\u003e\n\u003cth\u003eWeight (lb)\u003c\/th\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003eLight color\u003c\/th\u003e\n\u003cth\u003eLoad\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e151002415012459\u003c\/td\u003e\n\u003ctd\u003eFL151002415012459\u003c\/td\u003e\n\u003ctd\u003e0.9\u003c\/td\u003e\n\u003ctd\u003e59\"\u003c\/td\u003e\n\u003ctd\u003eNeutral White \/ 4000 K\u003c\/td\u003e\n\u003ctd\u003e15 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e151002415012059\u003c\/td\u003e\n\u003ctd\u003eFL151002415012059\u003c\/td\u003e\n\u003ctd\u003e0.55\u003c\/td\u003e\n\u003ctd\u003e59\"\u003c\/td\u003e\n\u003ctd\u003eSuper Warm White \/ 2700 K\u003c\/td\u003e\n\u003ctd\u003e15 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e151002415012259\u003c\/td\u003e\n\u003ctd\u003eFL151002415012259\u003c\/td\u003e\n\u003ctd\u003e0.55\u003c\/td\u003e\n\u003ctd\u003e59\"\u003c\/td\u003e\n\u003ctd\u003eWarm White \/ 3000 K\u003c\/td\u003e\n\u003ctd\u003e15 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15102420012279\u003c\/td\u003e\n\u003ctd\u003eFL15102420012279\u003c\/td\u003e\n\u003ctd\u003e0.55\u003c\/td\u003e\n\u003ctd\u003e78-3\/4\"\u003c\/td\u003e\n\u003ctd\u003eWarm White \/ 3000 K\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e151024600122236\u003c\/td\u003e\n\u003ctd\u003eFL151024600122236\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e236\"\u003c\/td\u003e\n\u003ctd\u003eWarm White \/ 3000 K\u003c\/td\u003e\n\u003ctd\u003e60 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch3\u003eInstallation \u0026amp; Optional Accessories\u003c\/h3\u003e\u003cp\u003eRecess into a 6 × 6mm groove, or surface mount. Cut only at the marked positions, approximately 21.7mm apart; never fold into a sharp right angle. Cutting removes assurance of the original IP44 rating; seal the cut end with transparent silicone as instructed. Indoor use only; installation by qualified personnel. A Micro24 extension is optional when the included lead will not reach. CM3-XD enables Bluetooth; CM4-XD enables Wi-Fi. Modules and extensions are sold separately.\u003c\/p\u003e\u003ch3\u003eDownloads \u0026amp; Resources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.domusline.com\/wp-content\/uploads\/2020\/03\/3490600-installation-manual-Flexyled-AT6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAT6 installation instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.domusline.com\/wp-content\/uploads\/2020\/03\/FLEXYLED-AT6_catalogue_sheet_EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAT6 manufacturer specification sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.domusline.com\/wp-content\/uploads\/2023\/11\/X-DRIVER-brochure_EN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eX-DRIVER specifications and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Domus Line","offers":[{"title":"151002415012459","offer_id":67644381823283,"sku":"FL151002415012459","price":85.8,"currency_code":"USD","in_stock":true},{"title":"151002415012059","offer_id":67644381856051,"sku":"FL151002415012059","price":112.75,"currency_code":"USD","in_stock":true},{"title":"151002415012259","offer_id":67644381888819,"sku":"FL151002415012259","price":85.8,"currency_code":"USD","in_stock":true},{"title":"15102420012279","offer_id":67644381921587,"sku":"FL15102420012279","price":155.35,"currency_code":"USD","in_stock":true},{"title":"151024600122236","offer_id":67644381954355,"sku":"FL151024600122236","price":314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0981\/1001\/3747\/files\/fl_ddkcrxirgo14b4hn.jpg?v=1791670348"},{"product_id":"domus-line-se-h4-13002414124059-led-strip","title":"Domus Line FLEXYLED SE H4-24 13002414124059 LED Strip, 59-inch, 4200K","description":"\u003cp\u003eDomus Line FLEXYLED SE H4-24 model 13002414124059 provides a narrow line of neutral-white light recessed into furniture. This 59-inch strip is the 24V, 14.4W version.\u003c\/p\u003e\u003ch3\u003eWhat Is Included\u003c\/h3\u003e\u003cp\u003eOne 59-inch silicone light strip, with two 2m (approximately 79-inch) Micro24 power leads. Power supply, control devices and U.S. power cord are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-wired at both ends:\u003c\/strong\u003e Approximately 79 inches of cable is already attached to each end. No extension cable is required for the standard connection. Buy an optional extension only when your layout needs more reach.\u003c\/p\u003e\u003ch3\u003eRequired to Make It Work — Sold Separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.domusline.com\/x-driver\/\" target=\"_blank\" rel=\"noopener\"\u003eX-DRIVER 30\/24D (0859501N)\u003c\/a\u003e single-color 24V DC power supply with Micro24 outputs. Choose the U.S.-compatible input version.\u003c\/li\u003e\n\u003cli\u003eDomus Line NEMA U.S. power cord 1159801\/S (IEC C7), unless included in your chosen driver kit.\u003c\/li\u003e\n\u003cli\u003eThis light uses 14.4W. Add the wattage of every light on the driver; allow at least 10% spare capacity. Do not connect to household voltage or a 12V supply.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConnection Order\u003c\/h3\u003e\u003cp\u003eOutlet → U.S. power cord → 24V driver → included Micro24 lead → light strip. The second lead serves the other end; use the manufacturer drawing when cutting or splitting.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eROK SKU\u003c\/th\u003e\n\u003cth\u003eWeight (lb)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e13002414124059\u003c\/td\u003e\n\u003ctd\u003eSEL13002414124059\u003c\/td\u003e\n\u003ctd\u003e0.33\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch3\u003eLight \u0026amp; Installation Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNeutral white 4200K; 24V DC; 14.4W; CRI 90.\u003c\/li\u003e\n\u003cli\u003eRecessed installation in a 4mm-wide × 8mm-deep groove.\u003c\/li\u003e\n\u003cli\u003eCut only at the marked cutting positions, approximately 33mm apart. This version is not the newer free-cut PRO model.\u003c\/li\u003e\n\u003cli\u003eOptional Micro24 extension, X-DRIVER control module and matching sensor\/remote are sold separately. An extension is only needed if the factory lead cannot reach.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDownloads \u0026amp; Resources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.domusline.com\/wp-content\/uploads\/2019\/11\/SE-H4-PRO_instruction-sheet_r3.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSE H4-24 installation drawings — use pages 1–2 for this version\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.domusline.com\/product\/se-h4-24\/\" target=\"_blank\" rel=\"noopener\"\u003eSE H4-24 manufacturer specifications\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.domusline.com\/x-driver\/\" target=\"_blank\" rel=\"noopener\"\u003eCompatible X-DRIVER system\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Domus Line","offers":[{"title":"13002414124059","offer_id":67644381987123,"sku":"SEL13002414124059","price":125.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0981\/1001\/3747\/files\/sel_8sqyfdufxhzfaqdr.jpg?v=1791670350"},{"product_id":"domus-line-hiddi-26400202412030-drawer-light","title":"Domus Line HIDDI 26400202412030 Drawer LED Light, 2700K","description":"\u003cp\u003eDomus Line HIDDI 26400202412030 lights the inside of a drawer or cabinet when it opens. Its built-in infrared door sensor operates the light automatically.\u003c\/p\u003e\u003ch3\u003eWhat Is Included\u003c\/h3\u003e\u003cp\u003eOne white HIDDI light with integrated sensor, 2m (approximately 79-inch) Micro24 lead, mounting support and screws. A separate door sensor is not required.\u003c\/p\u003e\u003ch3\u003eRequired to Make It Work — Sold Separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.domusline.com\/x-driver\/\" target=\"_blank\" rel=\"noopener\"\u003eX-DRIVER 30\/24D (0859501N)\u003c\/a\u003e single-color 24V DC power supply with Micro24 outputs. Choose the U.S.-compatible input version.\u003c\/li\u003e\n\u003cli\u003eDomus Line NEMA U.S. power cord 1159801\/S (IEC C7), unless included in your chosen driver kit.\u003c\/li\u003e\n\u003cli\u003eThis light uses 3W. Add the wattage of every light on the driver; allow at least 10% spare capacity. Do not connect to household voltage or a 12V supply.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConnection \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eOutlet → U.S. cord → unswitched 24V driver → HIDDI. Mount to the cabinet side with the sensor facing the closing drawer or door; check clearance and operation before fixing it permanently. Keep the sensor unobstructed. A Micro24 extension is optional if needed to reach the supply, sold separately.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eROK SKU\u003c\/th\u003e\n\u003cth\u003eWeight (lb)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e26400202412030\u003c\/td\u003e\n\u003ctd\u003eHDL26400202412030\u003c\/td\u003e\n\u003ctd\u003e0.3\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cp\u003e24V DC; 3W total; super warm white 2700K; approximately 98mm long × 25mm wide × 15mm high. White thermoplastic\/polycarbonate housing. The internal sensor switches on when opened and off after closing.\u003c\/p\u003e\u003ch3\u003eDownloads \u0026amp; Resources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.domusline.com\/wp-content\/uploads\/2021\/04\/3495000_r1_HIDDI_instruction_sheet-2.pdf\" target=\"_blank\" rel=\"noopener\"\u003eHIDDI installation instructions — single-color version\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.domusline.com\/product\/hiddi\/\" target=\"_blank\" rel=\"noopener\"\u003eHIDDI manufacturer specifications\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Domus Line","offers":[{"title":"26400202412030","offer_id":67644382052659,"sku":"HDL26400202412030","price":83.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0981\/1001\/3747\/files\/hdl_mkxrtmrb14hzzjwl.jpg?v=1791670352"},{"product_id":"tresco-l-xsqr72-sc-1-infinex-square-channel","title":"Tresco Infinex L-XSQR72-SC-1 Square Aluminum Channel, 72-inch","description":"\u003cp\u003eTresco by Rev-A-Shelf L-XSQR72-SC-1 is a 72-inch aluminum housing for a custom Infinex light. The empty channel does not illuminate by itself.\u003c\/p\u003e\u003ch3\u003eWhat Is Included\u003c\/h3\u003e\u003cp\u003eOne 72-inch square-profile aluminum extrusion in satin clear. LED strip, diffuser, end caps and electrical components are sold separately.\u003c\/p\u003e\u003ch3\u003eRequired to Build a Working Fixture — Sold Separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA compatible Tresco Infinex LED light source, its matched starter cord and a power supply selected for that light source. The channel itself has no electrical load.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/tresco-l-x72-diff-mlk-1-infinex-milk-diffuser\"\u003eL-X72-DIFF-MLK-1 milk diffuser\u003c\/a\u003e or the matching clear\/frosted Infinex diffuser.\u003c\/li\u003e\n\u003cli\u003eL-XSQRECP-GY-1 square end-cap set, unless an end is joined according to the Infinex instructions.\u003c\/li\u003e\n\u003cli\u003eA suitable mounting method: \u003ca href=\"\/products\/tresco-l-xsqr-uclp-1-infinex-mounting-clips\"\u003eL-XSQR-UCLP-1 clips\u003c\/a\u003e are a convenient choice. For the full 6-foot channel, the manufacturer recommends six clips, so order three pairs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eROK SKU\u003c\/th\u003e\n\u003cth\u003eWeight (lb)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eL-XSQR72-SC-1\u003c\/td\u003e\n\u003ctd\u003eRVLXSQR72SC1\u003c\/td\u003e\n\u003ctd\u003e0.6\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch3\u003eInstallation \u0026amp; Optional Accessories\u003c\/h3\u003e\u003cp\u003eCut the channel and diffuser to the required length before assembly. Square profile is approximately 11\/16-inch wide × 1\/2-inch high. Optional swivel clips, magnets and linking components are sold separately. Follow the Infinex component guide; the starter cord must match the chosen light source. Photos with LEDs illustrate assembly; LEDs are not included.\u003c\/p\u003e\u003ch3\u003eDownloads \u0026amp; Resources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/trescolighting.com\/media\/wysiwyg\/lighting-catalog\/Tresco_Lighting_Catalog--12V_Flexible_Lighting.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInfinex component selection, dimensions and assembly reference\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Tresco by Rev-A-Shelf","offers":[{"title":"L-XSQR72-SC-1","offer_id":67644382150963,"sku":"RVLXSQR72SC1","price":27.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0981\/1001\/3747\/files\/square_extrusion_1.jpg?v=1791670353"},{"product_id":"tresco-l-x72-diff-mlk-1-infinex-milk-diffuser","title":"Tresco Infinex L-X72-DIFF-MLK-1 Milk Diffuser, 72-inch","description":"\u003cp\u003eTresco Infinex L-X72-DIFF-MLK-1 is a 72-inch milk-colored diffuser that covers the light source in a compatible Infinex extrusion.\u003c\/p\u003e\u003ch3\u003eWhat Is Included\u003c\/h3\u003e\u003cp\u003eOne 72-inch plastic diffuser only. Channel, light source, power supply and mounting hardware are sold separately.\u003c\/p\u003e\u003ch3\u003eRequired \u0026amp; Compatibility\u003c\/h3\u003e\u003cp\u003eUse with a compatible Infinex channel, such as \u003ca href=\"\/products\/tresco-l-xsqr72-sc-1-infinex-square-channel\"\u003eL-XSQR72-SC-1 square channel\u003c\/a\u003e. The flush L-XFL channel uses its own flat diffuser; do not order this as a replacement for that supplied lens. A complete light also needs the LED source, matched wiring and power supply.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eROK SKU\u003c\/th\u003e\n\u003cth\u003eWeight (lb)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eL-X72-DIFF-MLK-1\u003c\/td\u003e\n\u003ctd\u003eRVLX72DIFFMLK1\u003c\/td\u003e\n\u003ctd\u003e0.15\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eCut to match the assembled channel length, then fit to the channel according to the Infinex guide. The milk finish diffuses light; this component does not produce light on its own.\u003c\/p\u003e\u003ch3\u003eDownloads \u0026amp; Resources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/trescolighting.com\/media\/wysiwyg\/lighting-catalog\/Tresco_Lighting_Catalog--12V_Flexible_Lighting.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInfinex diffuser and channel compatibility guide\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Tresco by Rev-A-Shelf","offers":[{"title":"L-X72-DIFF-MLK-1","offer_id":67644382282035,"sku":"RVLX72DIFFMLK1","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0981\/1001\/3747\/files\/diffuser.jpg?v=1791670355"},{"product_id":"tresco-l-xsqr-uclp-1-infinex-mounting-clips","title":"Tresco Infinex L-XSQR-UCLP-1 Square\/Curved U-Clips, Pair","description":"\u003cp\u003eTresco Infinex L-XSQR-UCLP-1 holds square or curved Infinex channels in place.\u003c\/p\u003e\u003ch3\u003eWhat Is Included\u003c\/h3\u003e\u003cp\u003eOne pair of U-clips (two clips), with #4 Phillips flat-head screws. Channel and lighting components are sold separately.\u003c\/p\u003e\u003ch3\u003eRequired \u0026amp; How Many to Buy\u003c\/h3\u003e\u003cp\u003eUse with Infinex square or curved extrusion. \u003ca href=\"\/products\/tresco-l-xsqr72-sc-1-infinex-square-channel\"\u003eL-XSQR72-SC-1\u003c\/a\u003e is the matching square channel. Allow one clip per foot of channel: a 72-inch channel needs six clips, or three pairs. Confirm that the supplied screws suit your cabinet material.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eROK SKU\u003c\/th\u003e\n\u003cth\u003eWeight (lb)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eL-XSQR-UCLP-1\u003c\/td\u003e\n\u003ctd\u003eRVLXSQRUCLP1\u003c\/td\u003e\n\u003ctd\u003e0.02\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003ePosition and fasten clips to the mounting surface, then engage the channel with the clips. Do not pinch lighting wires. Assembly images show the channel, sold separately.\u003c\/p\u003e\u003ch3\u003eDownloads \u0026amp; Resources\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/trescolighting.com\/media\/wysiwyg\/lighting-catalog\/Tresco_Lighting_Catalog--12V_Flexible_Lighting.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInfinex mounting hardware and assembly reference\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Tresco by Rev-A-Shelf","offers":[{"title":"L-XSQR-UCLP-1","offer_id":67644382347571,"sku":"RVLXSQRUCLP1","price":3.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0981\/1001\/3747\/files\/tresco_mounting_clips_1.jpg?v=1791670356"},{"product_id":"tresco-l-wld-cct-wh-1-cct-wall-controller","title":"Tresco FREEDiM L-WLD-CCT-WH-1 Wireless CCT Wall Controller, White","description":"\u003cp\u003eTresco FREEDiM L-WLD-CCT-WH-1 is a battery-operated wireless wall controller for compatible white-tunable lighting. It adjusts brightness and warm-to-cool white color; it does not supply power to the lights.\u003c\/p\u003e\u003ch3\u003eWhat Is Included\u003c\/h3\u003e\u003cp\u003eOne white CCT wall controller with battery. The receiver, lights and lighting power supply are sold separately.\u003c\/p\u003e\u003ch3\u003eRequired to Make It Work — Sold Separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTresco L-RGBCCT1-PREC-1 parent controller\/receiver.\u003c\/li\u003e\n\u003cli\u003eCompatible Tresco CCT lights, their CCT starter lead and a Class 2 power supply matching the lights’ voltage and total load.\u003c\/li\u003e\n\u003cli\u003eFor a finished wall installation, use a compatible Decora-style wall plate. This controller must not be wired to household line voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eROK SKU\u003c\/th\u003e\n\u003cth\u003eWeight (lb)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eL-WLD-CCT-WH-1\u003c\/td\u003e\n\u003ctd\u003eRVLWLDCCTWH1\u003c\/td\u003e\n\u003ctd\u003e0.08\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch3\u003eSetup \u0026amp; Optional Accessories\u003c\/h3\u003e\u003cp\u003ePair the wall controller to the parent receiver using the linked instructions. Set the receiver to CCT mode. For placement, follow the installation guide’s 50-foot range limit and test reception before mounting. Child receivers are optional for additional controlled runs. \u003ca href=\"\/products\/tresco-l-flxtpe-12cct-1-white-tunable-led-tape\"\u003eL-FLXTPE-12CCT-1 tape\u003c\/a\u003e is a compatible 12V white-tunable light; it needs its own required parts.\u003c\/p\u003e\u003ch3\u003eDownloads \u0026amp; Resources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/downloads.cabinetparts.com\/auto\/trescobyrevashelf-I-WLDCCTRGB-0822.PDF\" target=\"_blank\" rel=\"noopener\"\u003eFREEDiM wall controller installation and pairing instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/trescolighting.com\/media\/wysiwyg\/pdf\/CCT_Sales_Flyer.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCCT system components and wiring guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tresco by Rev-A-Shelf","offers":[{"title":"L-WLD-CCT-WH-1","offer_id":67644382413107,"sku":"RVLWLDCCTWH1","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0981\/1001\/3747\/files\/wall_dimmer.jpg?v=1791670358"},{"product_id":"tresco-l-flxtpe-12cct-1-white-tunable-led-tape","title":"Tresco L-FLXTPE-12CCT-1 White-Tunable LED Tape, 12V, 16.4-foot","description":"\u003cp\u003eTresco L-FLXTPE-12CCT-1 changes between warm and cool shades of white, from 2700K to 6500K. This is 12V white-tunable tape, not RGB colored-light tape or a complete kit.\u003c\/p\u003e\u003ch3\u003eWhat Is Included\u003c\/h3\u003e\u003cp\u003eOne 16.4-foot (5m) adhesive-backed roll only. The power supply, receiver and starter lead are sold separately.\u003c\/p\u003e\u003ch3\u003eRequired to Make It Work — Sold Separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA 12V DC Class 2 supply sized for the connected load. For the full 49W roll, use a 60W supply; the manufacturer’s wiring guide identifies L-DC-SLELT60-1 with its mounting block. Do not use a 24V supply.\u003c\/li\u003e\n\u003cli\u003eL-RGBCCT1-PREC-1 parent controller\/receiver, set to CCT mode.\u003c\/li\u003e\n\u003cli\u003eOne CCT starter lead: L-TPEPKT-2M-CCT-1 (79-inch) or L-TPEPKT-2IN-CCT-1 (2-inch). Use CCT connectors, not ordinary single-color or RGB leads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConnection Order\u003c\/h3\u003e\u003cp\u003eOutlet → 12V power supply\/mounting block → parent receiver → CCT starter lead → tape. Confirm the driver kit includes its input cord. Keep total load within the driver, receiver and connection ratings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eROK SKU\u003c\/th\u003e\n\u003cth\u003eWeight (lb)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eL-FLXTPE-12CCT-1\u003c\/td\u003e\n\u003ctd\u003eRVLFLXTPE12CCT1\u003c\/td\u003e\n\u003ctd\u003e0.2\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch3\u003eSpecifications \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003e12V DC; 3W per foot; 49W per roll; approximately 10mm wide. Cut only at the 1-inch\/25mm marked increments with power disconnected. The manufacturer lists a maximum 16-foot continuous run per starter cord; do not extend a run beyond that limit. Use the instructions to divide longer layouts.\u003c\/p\u003e\u003ch3\u003eOptional Accessories — Sold Separately\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/products\/tresco-l-wld-cct-wh-1-cct-wall-controller\"\u003eL-WLD-CCT-WH-1 wall controller\u003c\/a\u003e or L-RGBCCT-RMT-1 handheld remote adds wireless operation. CCT link cords, child receivers and L-4P6O-1 distribution adaptor are optional for additional runs. The manufacturer currently identifies this tape as a closeout item.\u003c\/p\u003e\u003ch3\u003eDownloads \u0026amp; Resources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/trescolighting.com\/media\/wysiwyg\/pdf\/CCT_Sales_Flyer.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWhite-tunable tape component and wiring guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.wwhardware.com\/media\/installation\/Tresco-FLXCCT-0720.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTresco CCT FlexTape installation instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/downloads.cabinetparts.com\/auto\/trescobyrevashelf-I-WLDCCTRGB-0822.PDF\" target=\"_blank\" rel=\"noopener\"\u003eReceiver connections and compatible power supply example\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tresco by Rev-A-Shelf","offers":[{"title":"L-FLXTPE-12CCT-1","offer_id":67644382544179,"sku":"RVLFLXTPE12CCT1","price":312.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0981\/1001\/3747\/files\/l-flxtpe-12cct-1_image3.jpg?v=1791670359"},{"product_id":"tresco-l-rsmot-ni-1-round-motion-sensor","title":"Tresco L-RSMOT-NI-1 Round Motion Sensor, 12\/24V, Nickel","description":"\u003cp\u003eTresco L-RSMOT-NI-1 automatically switches compatible single-color cabinet lighting on when it detects movement, then off after approximately 30 seconds without movement.\u003c\/p\u003e\u003ch3\u003eWhat Is Included\u003c\/h3\u003e\u003cp\u003eOne nickel-finish motion sensor with 79-inch input lead, 6-inch output lead, adaptor cords and surface-mount clip.\u003c\/p\u003e\u003ch3\u003eRequired to Make It Work — Sold Separately\u003c\/h3\u003e\u003cp\u003eCompatible Tresco single-color low-voltage lights and a power supply matching their voltage and load. The sensor is rated to 60W at 12V DC or 96W at 24V DC. Its adaptor cords change connector fit, not voltage. This is not the CCT parent receiver required by white-tunable tape.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eROK SKU\u003c\/th\u003e\n\u003cth\u003eWeight (lb)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eL-RSMOT-NI-1\u003c\/td\u003e\n\u003ctd\u003eRVL-RSMOT-NI-1\u003c\/td\u003e\n\u003ctd\u003e0.139\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003ch3\u003eInstallation \u0026amp; Operation\u003c\/h3\u003e\u003cp\u003eInstall on the low-voltage side between the power supply and lights. Use the surface clip or recess in a 1\/2-inch hole. Follow the linked wiring drawing for the selected 12V or 24V system. Detection range is up to 118 inches with a 120-degree view. Optional extension leads are sold separately.\u003c\/p\u003e\u003ch3\u003eDownloads \u0026amp; Resources\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/hardwarehut.com\/images\/pdf\/tresco\/i-rndsnsr-0722.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTresco round controller installation instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/trescolighting.com\/l-rsmot-ni-1\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer specifications\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tresco by Rev-A-Shelf","offers":[{"title":"L-RSMOT-NI-1","offer_id":67644382576947,"sku":"RVL-RSMOT-NI-1","price":36.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0981\/1001\/3747\/files\/rvl-rsmot-ni-1_1.jpg?v=1791670361"},{"product_id":"tresco-infinex-72-aluminum-flush-extrusion-with-milk-diffuser-satin-clear","title":"Tresco Infinex L-XFL72-SC-1 Flush Aluminum Channel with Milk Diffuser, 72-inch","description":"\u003cp\u003eTresco Infinex L-XFL72-SC-1 is a 72-inch aluminum channel for building a flush-mounted LED light. The milk diffuser is included. The channel itself does not produce light.\u003c\/p\u003e\u003ch3\u003eWhat Is Included\u003c\/h3\u003e\u003cp\u003eOne 72-inch satin-clear aluminum flush channel and one matching milk diffuser. Sold as one channel-and-diffuser set; ROK SKU RVXFL72-SC-10.\u003c\/p\u003e\u003ch3\u003eRequired to Make It Work — Sold Separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompatible LED tape sized for this Infinex channel.\u003c\/li\u003e\n\u003cli\u003eA power supply matched to the chosen tape’s voltage and total wattage.\u003c\/li\u003e\n\u003cli\u003eThe starter lead or connector specified for that tape, unless already included in the tape kit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is the housing only: LED tape, power supply and electrical controls are not included. The housing does not determine the operating voltage; use the requirements of the light installed inside it.\u003c\/p\u003e\u003ch3\u003eInstallation \u0026amp; Optional Accessories\u003c\/h3\u003e\u003cp\u003eThe ribbed sides press into a correctly sized routed groove for a flush installation. Cut the channel and diffuser to the required length and follow the Infinex installation drawing. Remote controls, sensors and dimmers are optional and must match the selected lighting system. Extension cables are optional, only when the included leads do not reach. You do not need to purchase another diffuser for this set.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer model\u003c\/th\u003e\n\u003ctd\u003eL-XFL72-SC-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eROK SKU\u003c\/th\u003e\n\u003ctd\u003eRVXFL72-SC-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e72 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e3\/4 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e7\/16 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial \/ finish\u003c\/th\u003e\n\u003ctd\u003eAluminum \/ satin clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiffuser\u003c\/th\u003e\n\u003ctd\u003eMilk diffuser included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.53 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eDownloads \u0026amp; Resources\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/s1.img-b.com\/build.com\/mediabase\/specifications\/tresco\/1868310\/tresco-l-xfl72-1-owners-manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTresco lighting specification guide — Infinex flush channel\u003c\/a\u003e\u003c\/p\u003e","brand":"Tresco by Rev-A-Shelf","offers":[{"title":"L-XFL72-SC-1","offer_id":67644529606963,"sku":"RVXFL72-SC-10","price":36.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0981\/1001\/3747\/files\/upload-1791678203927.jpg?v=1791678205"}],"url":"https:\/\/www.rokhardware.com\/collections\/lighting.oembed","provider":"ROK Hardware \u0026 Cabinets","version":"1.0","type":"link"}